Trumpet 2.0B Connection Guide for Salsgiver Inc. After Installing Trumpet Winsock open the application and select 'File' then 'Setup'. - Uncheck both the Internal SLIP and Internal PPP boxes - You will now be able to enter the Gateway and Name Server Information - In 'Default Gateway' type 206.67.234.10 - In 'Name server' type 206.67.234.10 - If you are using a Netscape Browser, we recommend setting the 'MTU' to 1006 (set the additional fields according to the picture below - Select the 'Internal PPP' box - The 'Slip Port' is the com port that your modem is connected to - The baud rate should be set to the highest speed that your modem allows ( a 14400 modem should be able to connect at 57600 ) - Select 'Hardware Handshake' - Online Status Detection should be 'None' - Next is the dialer window - Select 'Automatic login and logout on demand - Select 'Automatic redial when disconnected - Select 'Use standard SLIP settings for parity & word size - Finally, the Login script needs edited - Select 'Dialer' & 'Edit Scripts' - Edit the 'Login.cmd' file - About the 21st line of the script you will see two fields ( $userprompt and $passprompt ) - Change these two lines to the following: $userprompt = "ogin:" $passprompt = "assword:" - Save your changes & restart Trumpet Winsock Return to Software Support